Aakash Repeater Courses
Take Aakash iACST and get instant scholarship on coaching programs.
Have you ever thought why some medicines expire within months while others last for years? Why does milk spoil faster in summer than in winter? Why do some medicines expire within months while others last for years? Why do fireworks explode in seconds but rusting takes days? The chemical kinetics answers all these questions. It helps in understanding the rates at which chemical reactions occur and the factors that influence these rates. Chemical kinetics helps explain the speed at which reactions happen and the conditions under which the speed depends.
This Story also Contains
In the NCERT Solutions Class 12 Chemistry of Chapter 3, there are questions and solutions of some important topics like the average and instantaneous rate of a reaction, factors affecting the rate of reaction, integrated rate equations for zero and first-order reactions, etc. The Chemical Kinetics Class 12 NCERT Solutions cover all the questions from the textbook. Read further to know all the Chemical Kinetics exercise solutions.
This article includes some higher-order thinking skills (HOTS) questions that are beyond memorisation and promote conceptual understanding, improve analytical thinking, enhance application skills, and build confidence in chemistry. This article also includes a comparison table in which you will get a comparative study of JEE and NCERT concepts. The table includes which topic is beneficial for JEE beyond the NCERT and which is for the NCERT. Also, you will get an effective approach to solving questions of chemical kinetics.
Also Read,
Students can download the Chemical Kinetics Class 12 NCERT Solutions in PDF format for free. These solutions are designed to help you understand the fundamental concepts and solve textbook questions with ease.
All the in-text exercise questions of the chapter on chemical kinetics with detailed solutions are given below.
Page no 66
Answer :
We know that,
The average rate of reaction = $\frac{-\Delta [R]}{\Delta t}$
= $-\frac{ [R]_{2}-[R]_{1}}{t_{2}-t_{1}}$
= $\frac{0.03-0.02}{25}Mmin^{-1}$
= $4\times 10^{-4}Mmin^{-1}$
In seconds, we need to divide it by 60. So,
= $\frac{4\times 10^{-4}}{60}Msec^{-1}$
= 6.67 $\times 10^{-6}Msec^{-1}$
Question 3.2 In a reaction, $2A\rightarrow Products$ P, the concentration of A decreases from $0.5 mol L^{-1}$ to $0.4 mol L^{-1}$ in 10 minutes. Calculate the rate during this interval?
Answer :
According to the formula of an average rate
= $-\frac{1}{2}\frac{\Delta[ A]}{\Delta t}$ (final concentration - initial conc.)/time interval
= $-\frac{1}{2}\frac{[ A]_{2}-[A]_{1}}{t_{2}-t_{1}}$
= $-\frac{1}{2}\frac{[ 0.4]-[0.5]}{10}$
= $\frac{0.1}{20}Mmin^{-1}$
= $5\times 10^{-3}Mmin^{-1}$
Page no 71
Question 3.3 For a reaction, $A+B\rightarrow product$ ; the rate law is given by, $r=k\left [ A \right ]^{1/2}\left [ B \right ]^{2}$ . What is the order of the reaction?
Answer :
Order of reaction = Sum of powers of concentration of the reactant in the rate law expressions
So, here the power of A = 0.5
and power of B = 2
order of reaction = 2+0.5 =2.5
Answer :
The order of a reaction means the sum of the powers of concentration of the reactants in the rate law expression.
So rate law expression for the second-order reaction is $R=k[x]^{2}$ here R = rate
if the concentration is increased to 3 times means $x^{'}_{new}=3x$
new rate law expression = $R^{'}=k[3x]^{2}$ = $9k[x]^{2}$ = 9R
The rate of formation of Y becomes 9 times faster than before
Page no 78
Question 3.5 A first-order reaction has a rate constant $1.15\times 10^{-3}s^{-1}$. How long will $5g$ of his reactant take to reduce to $3g$?
Answer :
Given data,
initial conc. = 5g
final conc. = 3g
rate const. for first-order = $1.15\times 10^{-3}s^{-1}$
We know that for the first-order reaction,
$t=\frac{2.308}{k}\log\frac{[R]_{0}}{[R]}$
$=\frac{2.308}{1.15\times 10^{-3}}\log\frac{5}{3}$ [log(5/3)= 0.2219]
= 444.38 sec (approx)
Answer :
We know that t(half ) for the first-order reaction is $t_{1/2}=\frac{0.693}{k}$
and we have given the value of half time $t_{1/2} = 60 min$
thus, $k = \frac{0.693}{60}min^{-1}$
= 0.01155 /min
OR = 1.1925 $\times 10^{-4}sec^{-1}$
Alternative method
we can also solve this problem by using the first-order reaction equation.
$k = \frac{2.303}{t}\log\frac{[R]_{0}}{[R]}$
put $[R]=[R_{0}]/2$
Page no 84
Question 3.7 What will be the effect of temperature on the rate constant?
Answer :
The rate constant of the reaction is nearly doubled on rising in 10-degree temperature.The
Arrhenius equation depicts the relation between temperature and rate constant.
$k = Ae^{-\frac{E_{a}}{RT}}$
A= Arrhenius factor
Ea = Activation energy
R = gas constant
T = temperature
Question 3.8 The rate of the chemical reaction doubles for an increase of $10K$ in absolute temperature from $298K$. Calculate $E_{a}$.
Answer :
Given data
$T_{1}$ (initial temperature) = 298K and $T_{2}$ (final temperature)= 308K
And we know that the rate of reaction is nearly doubled when the temperature rises 10 degrees
So, $\frac{k_{2}}{k_{1}}=2$ and R = 8.314 J/mol/K
now, $\log\frac{k_{2}}{k_{1}}=\frac{ E_{a}}{2.303}[\frac{T_{2}-T_{1}}{T_{1}T_{2}}]$
On putting the value of the given data, we get,
$\log2=\frac{ E_{a}}{2.303}[\frac{10}{298\times 308}]$
Activation energy ( $E_{a}$ ) = $\frac{2.303\times 8.314\times 298\times 308\times \log2}{10}Jmol^{-1}$
=52.9 KJ/mol(approx)
Question 3.9 The activation energy for the reaction $2HI(g)\rightarrow H_{2}+I_{2}(g)$ is $209.5 KJ mol^{-1}$ at $518 K$ . Calculate the fraction of molecules of reactants having energy equal to or greater than the activation energy?
Answer :
We have
Activation energy = 209.5KJ/mol
temperature= 581K
R = 8.314J/mol/K
Now, the fraction of molecules of reactants having energy equal to or greater than the activation energy is given as
$x= e^{-E_{a}/RT}$
Taking the log of both sides, we get
$\log x = -\frac{E_{a}}{RT}$
$=\frac{209500Jmol^{-1}}{2.303\times 8.314Jmol^{-1}K^{-1}\times 581}$
= 18.832
x = antilog(18.832)
= 1.471 $\times 10^{-19}$
All the exercise questions of the chapter on chemical kinetics with detailed solutions are given below.
Question 3.1(i) From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants.
$3NO(g)\rightarrow N_{2}O\: \: Rate= k\left [ NO \right ]^{2}$
Answer :
Given pieces of information
Rate = $k[NO]^{2}$
So the order of the reaction is 2
The dimension of k = $Rate/[NO]^{2}$
$=\mathrm{molL}^{-1} \mathrm{~s}^{-1} / \mathrm{mol}^2 L^{-2} $
$=L \mathrm{~mol}^{-1} \mathrm{~s}^{-1}$
Question 3.1(ii) From the rate expression for the following reactions determine their order of reaction and the dimensions of the rate constants.
Answer :
Given rate = $k[H_{2}O_{2}][I^{-}]$
Therefore the order of the reaction is 2
Dimension of k = $rate/[H_{2}O_{2}][I^{-}]$
$\\=mol\ L^{-1}\ s^{-1}/(mol\ L^{-1})(mol\ L^{-1})\\$
$=L\ mol^{-1}\ s^{-1}$
Question 3.1(iii) From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants.
$CH_{3}CHO(g)\rightarrow CH_{4}(g)+CO(g)\: \: Rate=k\left [ CH_{3} CHO\right ]^{3/2}$
Answer :
Given $Rate = k[CH_{3}CHO]^{3/2}$
therefore the order of the reaction is 3/2
and the dimension of k $=Rate/[CH_{3}CHO]^{3/2}$
$\\=molL^{-1}s^{-1}/(molL^{-1})^{3/2}\\$
$=molL^{-1}s^{-1}/mol^{3/2}L^{-3/2}\\$
$ =L^{1/2}\ mol^{-1/2}\ s^{-1}$
Question 3.1(iv) From the rate expression for the following reactions, determine their order of reaction and the dimensions of the rate constants.
$C_{2}H_{5}Cl(g\rightarrow )C_{2}H_{4}(g)+HCL(g) \: Rate=k\left [ C_{2}H_{5}Cl \right ]$
Answer :
$rate = k[C_{2}H_{5}Cl]$
so the order of the reaction is 1
and the dimension of k = $rate/[C_{2}H_{5}Cl]$
$\\=molL^{-1}s^{-1}/mol L^{-1}\\ =s^{-1}$
Question 3.2 For the reaction:
$2A+B\rightarrow A_{2}B$
the rate = $k\left [ A \right ]\left [ B \right ]^{2}$ with $k=2.0\times 10^{-6}mol^{-2}L^{2}s^{-1}$ . Calculate the initial rate of the reaction when $\left [ A \right ]=0.1 mol L^{-1}\: \: ,\left [ B \right ]=0.2 mol L^{-1}$ . Calculate the rate of reaction after $\left [ A \right ]$ is reduced to $0.06molL ^{-1}$ .
Answer :
The initial rate of reaction =
$rate = k[A][B]^{2}$
Substitute the given values of [A], [B] and k,
rate = $2\times 10^{-6}\times 0.1\times (0.2)^{2}$
=8 $\times 10^{-9}mol^{-2}\ L^{2}\ s^{-1}$
When [A] is reduced from 0.1 mol/L to 0.06 mol/L $[A^{'}=0.06]$
So, conc. of A reacted = 0.1-0.06 = 0.04 mol/L
and conc. of B reacted = 1/2(0.04) = 0.02mol/L
conc. of B left = (0.2-0.02) = 0.18 mol/L $[B^{'}=0.18]$
Now, the rate of the reaction is (R) = $k[A^{'}][B^{'}]$
$=2\times 10^{-6}\times 0.06\times (0.18)^{2}$
= $3.89\times 10^{-6}$ $mol L^{-1}s^{-1}$
Answer :
The decomposition of $NH_{3}$ on the platinum surface reaction
$2NH_{3}(s)\overset{Pt}{\rightarrow}N_{2}(g)+3H_{2}(g)$
therefore,
Rate = $-\frac{1}{2}\frac{d[NH_{3}]}{dt}=\frac{d[N_{2}]}{dt}=\frac{1}{3}\frac{d[H_{2}]}{dt}$
For zero order reaction rate = k
therefore, $-\frac{1}{2}\frac{d[NH_{3}]}{dt}=\frac{d[N_{2}]}{dt}=\frac{1}{3}\frac{d[H_{2}]}{dt}=k$
So $\frac{d[N_{2}]}{dt}= 2.5\times 10^{-4}mol\ L^{-1}\ s^{-1}$
and the rate of production of dihydrogen $(H_{2})$ = 3 $\times$ (2.5 $\times 10^{-4}$ ) $mol\ L^{-1}\ s^{-1}$
= 7.5 $\times 10^{-4}$ $mol\ L^{-1}\ s^{-1}$
Answer :
Given that
$rate = k(P_{CH_{3}OCH_{3}})^{3/2}$
So, the unit of rate is bar/min .( $bar\ min^{-1}$ )
And thus the unit of k = unit of rate $/(bar)^{3/2}$
$\\=bar\ min^{-1}/(bar)^{3/2}\\ =bar^{-1/2}min^{-1}$
Question 3.5: Mention the factors that affect the rate of a chemical reaction.
Answer :
The following factors affect the rate of reaction-
Question 3.6(i) A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is doubled
Answer :
Let us assume the concentration of the reactant is x
So, rate of reaction, $R =k[x]^{2}$
Now, if the concentration of the reactant is doubled, then $x\rightarrow 2x$. So the rate of reaction would be $R = k[2x]^{2} = 4kx^{2}=4R$
Hence we can say that the rate of reaction increased by 4 times.
Question 3.6(ii) A reaction is second order with respect to a reactant. How is the rate of reaction affected if the concentration of the reactant is reduced to half ?
Answer :
Let assume the concentration of reactant be x
So, rate of reaction, R = $k[x]^{2}$
Now, if the concentration of the reactant is doubled, then $x\rightarrow \frac{x}{2}$ . So the rate of reaction would be $R = k[\frac{x}{2}]^{2} = \frac{kx^{2}}{4}=\frac{R}{4}$
Hence we can say that the rate of reaction is reduced to 1/4 times.
Answer :
The rate constant is nearly double when there is a 10-degree rise in temperature in a chemical reaction.The
effect of temperature on the rate constant can be represented quantitatively by the Arrhenius equation.
$K =Ae^{-E_{a}/RT}$ where k is rate constant
A is the Arrhenius factor
R is the gas constant
T is temperature and
$E_{a}$ is the activation energy
Question 3.8 In pseudo-first-order hydrolysis of an ester in water, the following results were obtained:
(i) Calculate the average rate of reaction between the time intervals 30 to 60 seconds.
Answer :
The average rate of reaction between the time 30 s to 60 s is expressed as
$R = \frac{d[ester]}{dt}$
$\\=(0.31-0.17)/60-30\\ $
$=0.14/30=4.67\times 10^{-3} mol\ L^{-}\ s^{-}$
Question 3.9(i) A reaction is first order in A and second order in B.
(i)Write the differential rate equation.
Answer :
The reaction is first order in A and second order in B. it means the power of A is one and the power of B is 2
The differential rate equation will be
$-\frac{d[R]}{dt}=k[A][B]^{2}$
Question 3.9(ii) A reaction is first order in A and second order in B.
(ii) How is the rate affected by increasing the concentration of B three times?
Answer :
If the concentration of [B] is increased by 3 times, then
$-\frac{d[R]}{dt}=k[A][3B]^{2}$
$=9k[A][B]^{2}$
Therefore, the rate of reaction will increase 9 times.
Question 3.9(iii) A reaction is first order in A and second order in B.
(iii) How is the rate affected when the concentrations of both A and B are doubled?
Answer :
If the concentration of [A] and[B] is increased by 2 times, then
$-\frac{d[R]}{dt}=k[2A][2B]^{2}$
$=8k[A][B]^{2}$
Therefore, the rate of reaction will increase 8 times.
What is the order of the reaction with respect to A and B?
Answer :
we know that
rate law ( $r_{0}$ ) = $k[A]^{x}[B]^{y}$
As per data
$\\5.07\times 10^{-5} =k[0.2]^{x}[0.3]^{y}\\ 5.07\times 10^{-5}$
$=k[0.2]^{x}[0.1]^{y}\\ 1.43\times 10^{-4}$
$=k[0.4]^{x}[0.05]^{y}$
These are equations 1, 2 and 3, respectively
Now, divide eq.1 by equation 2, we get
$1= (0.3/0.1)^{y}$
from here, we calculate that y = 0
Again, dividing Eq. 2 by Eq. 3, we get
Since y =0, also substitute the value of y
So,
= $(\frac{1.43}{0.507})= (\frac{0.4}{0.2})^{x}$
= $2.821=2^{x}$
Taking the log of both sides, we get,
$x = \frac{\log2.821}{\log2}$
= 1.496
= approx 1.5
Hence the order of reaction w.r.t A is 1.5 and w.r.t B is 0(zero)
Question 3.11 The following results have been obtained during the kinetic studies of the reaction:
2A + B $\rightarrow$ C + D
Determine the rate law and the rate constant for the reaction .
Answer :
Let assume the rate of reaction wrt A is $x$ and wrt B is $y$ . So, the rate of reaction is expressed as-
Rate = $k[A]^{x}[B]^{y}$
According to given data,
$\\6\times 10^{-3}=k[0.1]^{x}[0.1]^{y}\\ 7.2\times 10^{-2}$
$=k[0.3]^{x}[0.2]^{y}\\ 2.88\times 10^{-2$}$
$=k[0.3]^{x}[0.4]^{y}\\ 2.4\times 10^{-2}$
$=k[0.4]^{x}[0.1]^{y}$
These are equations 1, 2, 3 and 4, respectively
Now, divide the equation(iv) by (i) we get,
$4 = (0.4/0.1)^{x}$
from here, we calculate that $x =1$
Again, divide equation (iii) by (ii)
$4 =(0.4/0.2)^{y}$
from here, we can calculate that the value of y is 2
Thus, the rate law is now, $Rate = k[A][B]^{2}$
So, $k = rate/[A][B]^{2}$
$\\= 6\times 10^{-3}/(0.1)\times (0.1)^{2}\\$
$ =6\ L^{2}\ mol^{-2}\ min^{-1}$
Hence the rate constant of the reaction is $=6\ L^{2}\ mol^{-2}\ min^{-1}$
Experiment
|
[A]/molL-1
| [B]/molL-1 | Initial rate/ mol L-1 min-1 |
I
|
0.1
|
0.1
|
2*10-2
|
II
| - |
0.2
|
4*10-2
|
III
|
0.4
|
0.4
| - |
IV
|
0.2
|
2*10-2
|
Answer :
The given reaction is first order wrt A and zero order in wrt B. So, the rate of reaction can be expressed as;
$Rate = k[A][B]^{0}$
Rate = k[A]
from exp 1,
$2\times 10^{-2}=k(0.1)$
k = 0.2 per min.
from experiment 2nd,
$4\times 10^{-2}=0.2[A] \\$
[A] = $0.2\ mol/L$
from experiment 3rd,
$rate =(0.2\ min^{-1})\times (0.4\ mol/L)$
$= 0.08\ mol\ L^{-1}\ min^{-1}$
from the experiment 4th,
$2\times 10^{-2}=0.2*[A]$
from here [A] = 0.1 mol/L
Question 3.13 (1) Calculate the half-life of a first-order reaction from their rate constants given below:
$200 s^{-1}$
Answer :
We know that,
half-life ( $t_{1/2}$ ) for first-order reaction = $0.693/k$
= $0.693/200$
$\approx 3.4\times 10^{-3}s$
Question 3.13 (2) Calculate the half-life of a first-order reaction from their rate constants given below:
$2\: \: min ^{-1}$
Answer :
the half-life for the first-order reaction is expressed as ;
$t_{1/2}=0.693/k$
= 0.693/2
= 0.35 min (approx)
Question 3.13 (3) Calculate the half-life of a first-order reaction from their rate constants given below:
4 $years ^{-1}$
Answer :
The half-life for the first-order reaction is $t_{1/2}= 0.693/k$
= 0.693/4
= 0.173 year (approximately)
Answer :
Given,
half-life of radioactive decay = 5730 years
So, $t_{1/2}= 0.693/k$
$k = 0.693/5730$ per year
We know that, for a first-order reaction,
$t = \frac{2.303}{k} \log\frac{[R_{0}]}{[R]}$
$t = \frac{2.303}{.693/5730} \log\frac{100}{80}$
= 1845 years (approximately)
Thus, the age of the sample is 1845 years
Question 3.15 (1) The experimental data for the decomposition of
$2 N_2 O_5 \rightarrow 4 NO_2 + O_2$
In the gas phase at 318K are given below:
Plot $[N_2O_5]$ against t.
Answer :
On increasing time, the concentration of $N_{2}O_{5}$ gradually decreasing exponentially.
Question 3.15 (2) The experimental data for decomposition of $2 N_2O_5 \rightarrow 4 NO_2 + O_2$ in gas phase at 318K are given below:
Find the half-life period for the reaction.
Answer :
The half-life of the reaction is-
The time corresponding to the $1.63 \times 10^{2}/2$ mol/ L = 81.5 mol /L is the half-life of the reaction. From the graph, the answer should be in the range of 1400 s to 1500 s.
Question 3.15 (3) The experimental data for decomposition of $N_2O_5 [2N_2O_5 \rightarrow 4NO_2 + O_2]$ in the gas phase at 318K are given below:
Draw a graph between $\log [ N_2 O_5 ]$ and t.
Answer :
$t/S$ | $10^{2}\times [N_{2}O_{5}]$ | $\log[N_{2}O_{5}]$ |
0 | 1.63 | -1.79 |
400 | 1.36 | -1.87 |
800 | 1.14 | -1.94 |
1200 | 0.93 | -2.03 |
1600 | 0.78 | -2.11 |
2000 | 0.64 | -2.19 |
2400 | 0.53 | -2.28 |
2800 | 0.43 | -2.37 |
3200 | 0.35 | -2.46 |
Question 3.15 (4) The experimental data for decomposition of $N_2O_5 [2N_2O_5 \rightarrow 4NO_2 + O_2]$ in the gas phase at 318K are given below:
Answer :
Here, the reaction is in first-order reaction because its log graph is linear.
Thus rate law can be expessed as $Rate = k[N_{2}O_{5}]$
Question 3.15 (5) The experimental data for decomposition of $N_2O_5 [2N_2O_5 \rightarrow 4NO_2 + O_2]$ in the gas phase at 318K are given below:
Answer :
From the log graph,
the slope of the graph is = $\frac{-2.46-1.79}{3200}$
= -k/2.303 ..(from log equation)
On comparing both the equation, we get,
$-k/2.303 = -0.67/3200$
$k= 3200\times (0.67/3200)$
$k= 4.82 \times 10^{-4}\ s^{-1}$
Question 3.15 (6) The experimental data for decomposition of $N_2O_5 [2N_2O_5 \rightarrow 4NO_2 + O_2]$ in the gas phase at 318K are given below:
Calculate the half-life period from k and compare it with (ii).
Answer :
The half life produce = $0.693/k$
= $=0.693/4.82 \times 10^{-4}$
$1.438\times 10^{3} s$
Answer :
We know that,
for a first-order reaction,
$t=\frac{2.303}{k}\log\frac{[R]_{0}}{[R]}$
$\\=\frac{2.303}{60}\log\frac{1}{1/16}\\ $
$=\frac{2.303}{60} \log2^{4}$
$=4.6 \times 10^{-2} s$ (nearly)
Hence the time required is $=4.6 \times 10^{-2} s$
Answer :
Given,
half life = 21.8 years
$\therefore\ k=0.693/t_{1/2}$
= 0.693/21.8
and, $t = \frac{2.303}{k}\log\frac{[R]_{0}}{[R]}$
by putting the value we get,
$10= \frac{2.303}{0.693/21.8}\log\frac{1}{[R]}$
$\log[R] = -\frac{10\times 0.693}{2.303\times 21.8}$
taking antilog on both sides,
[R] = antilog(-0.1071)
= 0.781 $\mu g$
Thus, 0.781 $\mu g$ of ${Sr}^{90}$ will remain after 10 years.
Again,
$\begin{aligned} & t=\frac{2.303}{k} \log \frac{[\mathrm{R}]_0}{[\mathrm{R}]} \\ & \Rightarrow 60=\frac{2.303}{\frac{0.693}{28.1}} \log \frac{1}{[\mathrm{R}]} \\ & \Rightarrow \log [\mathrm{R}]=-\frac{60 \times 0.693}{2.303 \times 28.1} \\ & \begin{aligned} \Rightarrow[\mathrm{R}] & =\operatorname{antilog}(-0.6425) \\ & =\operatorname{antilog}(\overline{1} .3575) \\ & =0.2278 \mu \mathrm{~g}\end{aligned}\end{aligned}$
Thus 0.2278 $\mu g$ of ${Sr}^{90}$ will remain after 60 years.
Answer :
Case 1-
for 99% complition,
$t^{1} = \frac{2.303}{k}\log\frac{100}{100-99}$
$= \frac{2.303}{k}\log100$
$=2\times (\frac{2.303}{k})$
Case- II
for 90% complition,
$t^{2}=\frac{2.303}{k}\log\frac{100}{100-90}$
$=\frac{2.303}{k}\log10$
$=(\frac{t^{1}}{2})$
$t^{1}=2t^{2}$
Hence proved.
Question 3.19 A first order reaction takes 40 min for 30% decomposition. Calculate $t_{1/2}$
Answer :
For the first-order reaction,
$t =\frac{2.303}{k}\log \frac{[R]_{0}}{[R]}$
$k =\frac{2.303}{40}\log \frac{100}{100-30}$ (30% already decomposed and remaining is 70%)
$=8.918\times 10^{-3} min^{-1}$
therefore half life = 0.693/k
= $0.693/8.918\times 10^{-3}$
= 77.7 (approx)
Question 3.20 For the decomposition of azoisopropane to hexane and nitrogen at 543K, the following data are obtained.
t(sec) | P(mmHg) |
0 | 35.0 |
360 | 54.0 |
720 | 63.0 |
Calculate the rate constant.
Answer :
This decomposition is first-order, and in gas-phase kinetics, pressure can be used in place of concentration if temperature and volume are constant.
For a first-order reaction, the integrated rate law is:
$
k=\frac{1}{t} \ln \left(\frac{P_{\infty}-P_0}{P_{\infty}-P_t}\right)
$
Where:
- $P_0=35.0 \mathrm{mmHg}$ (initial pressure)
- $P_t$ is pressure at time $t$
- $P_{\infty}=2 P_0=70.0 \mathrm{mmHg}$ (since $1 \mathrm{~mol} \rightarrow 2 \mathrm{~mol}$ gases)
Step 2: Calculate rate constant using data at $t=360 \mathrm{~s}$
$
\begin{gathered}
k=\frac{1}{360} \ln \left(\frac{70-35}{70-54}\right)=\frac{1}{360} \ln \left(\frac{35}{16}\right)=\frac{1}{360} \ln (2.1875) \\
\ln (2.1875) \approx 0.7827 \\
k=\frac{0.7827}{360} \approx 2.174 \times 10^{-3} \mathrm{~s}^{-1}
\end{gathered}
$
$
k \approx 2.17 \times 10^{-3} \mathrm{~s}^{-1}
$
Experiment | Time/s-1 | Total Pressure/atm |
1 | 0 | 0.5 |
2 | 100 | 0.6 |
Calculate the rate of the reaction when total pressure is 0.65 atm.
Answer :
The thermal decomposition of $SO_{2}Cl_{2}$ is shown here;
$
\mathrm{SO}_2 \mathrm{Cl}_2 \rightarrow \mathrm{SO}_2+\mathrm{Cl}_2
$
Initial pressure $\quad p_0 \quad 0 \quad 0$
Pressure at time $t \quad p_0-p \quad p \quad p$
Let initial pressure, $P_0 \propto R_0$
Pressure at time t $p_t=p_0-p+p+p=p_0+p$
Pressure of reactants at time t $ p_0-p=2 p_0-p_t \propto R$
After t time, the total pressure $p_{t}$ = $p_{0}-p+(p+p) = p_{0}+p$
So, $p = p_{t}-p_{0}$
thus, $p_{0}-p = 2p_{0}-p_{t}$
for first order reaction,
$k= \frac{2.303}{t}\log\frac{p_{0}}{p_{0}-p}$
$= \frac{2.303}{360}\log\frac{p_{0}}{2p_{0}-p_{t}}$
now putting the values of pressures, when t = 100s
$k = \frac{2.303}{100}\log\frac{0.5}{2*0.5-0.6}$
$= 2.231 \times 10^{-3}\ s^{-1}$
when $p_{t} = 0.65\ atm$
$p = p_{t}-p_{0}$
= 0.65 - 0.5
= 0.15 atm
So, $p(_{SO_{2}Cl_{2}}) = p_{0}-p$
= 0.5 - 0.15
= 0.35 atm
Thus, rate of reaction, when the total pressure is 0.65 atm
rate = k( $p(_{SO_{2}Cl_{2}})$ )
= $2.31\times 10^{-3}\times 0.35$
= 7.8 $\times 10^{-4}\ atm\ s^{-1}$
Question 3.22 The rate constant for the decomposition of $N_{2}O_{5}$ at various temperaturesis given below:
Draw a graph between ln k and 1/T and calculate the values of A and
$E_a$ . Predict the rate constant at 30° and 50°C.
Answer :
From the above data,
T/ $C^{0}$ | 0 | 20 | 40 | 60 | 80 |
T/K | 273 | 293 | 313 | 333 | 353 |
$1/T$ $/$ $K^{-1}$ ( $\times 10^{-3}$ ) | 3.66 | 3.41 | 3.19 | 3.0 | 2.83 |
$10^{5}*K/S^{-}$ | 0.0787 | 1.70 | 25.7 | 178 | 2140 |
$ln\ K$ | -7.147 | -4.075 | -1.359 | -0.577 | 3.063 |
Slope of line = $\frac{y2-y2}{x2-x1} = -12.30\ K$
According to Arrhenius equations,
Slope = $-E_{a}/R$
$E_{a}=$ 12.30 $\times$ 8.314
= 102.27 $KJ mol^{-1}$
Again,
$
\begin{aligned}
& \ln k=\ln A-\frac{E_a}{\mathrm{R} T} \\
& \ln A=\ln k+\frac{E_a}{\mathrm{R} T}
\end{aligned}
$
When $T=273 \mathrm{~K}$,
$\ln k=-7.147$
When $T=273 \mathrm{~K}$,
$\ln k=-7.147$
Then, $\ln A=-7.147+\frac{102.27 \times 10^3}{8.314 \times 273}$
$=37.911$
Therefore, $A=2.91 \times 10^6$
When T = 30 +273 = 303 K and 1/T =0.0033K
$\ln k= -2.8$
$\therefore$ k = $6.08\times 10^{-2}\ s^{-1}$
When T = 50 + 273 = 323 K and 1/T = 3.1 $\times 10^{-3}$ K
$\ln k = -0.5$
$\therefore$ k = 0.607 per sec
Answer :
Given that,
k = $2.418 \times 10 ^{-5} s ^{-1}$
$E_{a}$ = 179.9 KJ/mol
T(temp) = 546K
According to Arrhenius equation,
$k=Ae^{-E_{a}/RT}$
taking log on both sides,
$\log k = \log A - \frac{E_{a}}{2.303 RT}$
$\log A =\log k + \frac{E_{a}}{2.303 RT}$
$=\log (2.418\times 10^{-5}) + \frac{179.9\times 10^{3}}{2.303 \times 8.314 \times 546}$
= (0.3835 - 5) + 17.2082
= 12.5917
Thus A = antilog (12.5917)
A = 3.9 $\times 10^{12}$ per sec (approx)
Answer :
Given that,
k = $=2\times 10^{-2}$
t = 100 s
$[A]_0= 1\ mol\ L^{-1}$
Here the unit of k is in per sec, it means it is a first-order reaction.
therefore,
$k = \frac{2.303}{t}\log\frac{[A]_o}{[A]}$
$\\2\times 10^{-2} = \frac{2.303}{100}\log\frac{1}{[A]}\\ 2\times 10^{-2} $
$= -\frac{2.303}{100}\log[A]\\ \log[A]=-\frac{2}{2.303}\\$
$\\A = anti\log\frac{-2}{2.303}\\ A= 0.135 mol\ L^{-1}$
Hence the concentration of rest test sample is 0.135 mol/L
Answer :
For first order reaction,
$k = \frac{2.303}{t}\log\frac{[R]_{0}}{[R]}$
given that half life = 3 hrs ( $t_{1/2}$ )
Therefore k = 0.693/half-life
= 0.231 per hour
Now,
$\\0.231 = \frac{2.303}{8}\log\frac{[R]_{0}}{[R]}\\ \log\frac{[R]_{0}}{[R]} $
$= 0.231\times \frac{8}{2.203}$
= antilog (0.8024)
= 6.3445
$[R]_{0}/[R] = 6.3445$
$[R]/[R]_{0} = 0.157$ (approx)
Therefore fraction of sample of sucrose remains after 8 hrs is 0.157
Question 3.26 The decomposition of hydrocarbon follows the equation k=(4.51011s-1)e-28000K/T . Calculate $E_{a}$
Answer :
The Arrhenius equation is given by
$k=Ae^{-E_{a}/RT}$ .................................(i)
given equation,
A= 4.51011 per sec.............(ii)
by comparing equation (i) & (ii) we get,
A= 4.51011 per sec
$E_{a}/RT =28000/T$
Activation energy = 28000 $\times$ (R = 8.314)
= 232.792 KJ/mol
Calculate $E_a$ for this reaction and at what temperature will its half-period be 256 minutes?
Answer :
The Arrhenius equation is given by
$k=Ae^{-E_{a}/RT}$
taking log on both sides,
$\log k = \log A -\frac{E_{a}}{2.303RT}$ ....................(i)
given equation,
$\log k = 14.34 - 1.25 \times 10 ^ 4K/T$ .....................(ii)
On comparing both equation we get,
$E_{a}/2.303R=1.25 \times 10^{4}$
activation energy
$\\=1.25 \times 10^{4} \times 2.303 \times 8.314\\ $
$=239.34\ KJ/mol$
half life ( $t_{1/2}$ ) = 256 min
k = 0.693/256
$k = 4.51\times 10^{-5} s^{-1}$
With the help of equation (ii),
$\log4.51\times 10^{-5} s^{-1} = 14.34-\frac{1.25\times 10^{4}}{T}$
$\frac{1.25\times 10^{4}}{T} = 18.686$
T = $\frac{1.25\times 10^{4}}{18.686}$
= 669 (approx)
Question 3.28 The decomposition of A into product has value of k as $4.5 \times 10 ^3 s ^{-1}$ at 10°Cand energy of activation 60 kJ $mol^{-1}$. At what temperature would k be $1.5 \times 10 ^4 s ^{-1}$ ?
Answer :
The decomposition of A into a product has a value of k as $4.5 \times 10 ^3 s ^{-1}$ at 10°C and energy of activation 60 kJ mol–1.
K1 = $4.5 \times 10 ^3 s ^{-1}$
K2 = $1.5 \times 10 ^4 s ^{-1}$
$E_a$ = 60 kJ mol–1
K2 = $1.5 \times 10 ^4 s ^{-1}$
$log\frac{K_2}{K_1}=\frac{E_a(T_2-T_1)}{2.303RT_1T_2}$
$log(\frac{1.5\times 10^{4}}{4.5\times 10^{3}})=\frac{60(T_2-283)}{2.303\times R\times 283\times T_2}$
$log(\frac{150}{45})=\frac{60(T_2-283)}{5418.61\times T_2}$
$log150-log45=\frac{60T_2-16980}{5418.61\times T_2}$
$2.176-1.653=\frac{60T_2-16980}{5418.61\times T_2}$
$0.5229=\frac{60T_2-16980}{5418.61\times T_2}$
$T_2=\frac{16980}{2733.4}$
$T_2=6.1K$
Answer :
We know that,
for a first order reaction-
$t = \frac{2.303}{k}\log\frac{a}{a-x}$
Case 1
At temp. = 298 K
$t = \frac{2.303}{k}\log\frac{100}{90}$
= 0.1054/k
Case 2
At temp = 308 K
$t' = \frac{2.303}{k}\log\frac{100}{75}$
= 2.2877/k'
As per the question
$t' = t$
K'/K = 2.7296
From Arrhenius equation,
$\begin{aligned} & \log \frac{k^{\prime}}{k}=\frac{E_a}{2.303 \mathrm{R}}\left(\frac{T^{\prime}-T}{T T^{\prime}}\right) \\ & \log (2.7296)=\frac{E_a}{2.303 \times 8.314}\left(\frac{308-298}{298 \times 308}\right) \\ & E_a=\frac{2.303 \times 8.314 \times 298 \times 308 \times \log (2.7296)}{308-298}\end{aligned}$
= 76640.096 J /mol
=76.64 KJ/mol
k at 318 K
we have , T =318K
A= $4 \times 10^{10}$
Now $\log k = \log A- \frac{E_{a}}{2.303RT}$
After putting the calue of given variable, we get
$\log k = -1.9855$
on takingantilog we get,
k = antilog(-1.9855)
= 1.034 $\times 10^{-2}\ s^{-1}$
Answer :
From the Arrhenius equation,
$\log\frac{k_{2}}{k_{1}}=\frac{E_{a}}{2.303R}(\frac{T_{2}-T_{1}}{T_{1}T_{2}})$ ...................................(i)
it is given that $k_{2}=4k_{1}$
T1= 293 K
T2 = 313 K
Putting all these values in equation (i) we get,
$\log 4 =\frac{E_{a}}{2.303 \times 8.314}(\frac{313-293}{313 \times 293})$
$\begin{aligned} & \Rightarrow 0.6021=\frac{20 \times E_a}{2.303 \times 8.314 \times 293 \times 313} \\ & \Rightarrow E_a=\frac{0.6021 \times 2.303 \times 8.314 \times 293 \times 313}{20}\end{aligned}$
Activation Energy = 52.86 KJ/mol
This is the required activation energy
Some higher-order thinking skills questions with solutions are given below:
Question 1. In a reaction $A+B \rightarrow C$, initial concentrations of $A$ and $B$ are related as $[A]_0=8[B]_0$. The half-lives of $A$ and $B$ are 10 min and 40 min, respectively. If they start to disappear at the same time, both following first-order kinetics, after how much time will the concentration of both the reactants be the same?
1) 60 min
2) 80 min
3) 20 min
4) 40 min
Answer:
$\begin{aligned} & \text { Given : }[\mathrm{A}]_0=8[\mathrm{~B}]_0 \\ & {\left[\mathrm{t}_{1 / 2}\right]_{\mathrm{A}}=10 \text { min. }} \\ & {\left[\mathrm{t}_{1 / 2}\right]_{\mathrm{B}}=40 \text { min. }} \\ & \mathrm{I}^{\mathrm{s}} \text { order kinetics } \\ & \mathrm{t}=? \\ & {[\mathrm{~A}]_{\mathrm{t}} \quad=[\mathrm{B}]_{\mathrm{t}}} \\ & -\mathrm{k}_{\mathrm{A}} \times \mathrm{t} \quad-\mathrm{k}_{\mathrm{B}} \times \mathrm{t} \\ & \Rightarrow \quad[\mathrm{A}]_0 \mathrm{e}=[\mathrm{B}]_0 \mathrm{e} \\ & \Rightarrow \quad \frac{[\mathrm{A}]_0}{[\mathrm{~B}]_0}=\mathrm{e}^{\left(\mathrm{k}_{\mathrm{A}}-\mathrm{k}_{\mathrm{B}}\right) \mathrm{t}} \\ & \Rightarrow \quad 8=\mathrm{e}^{\left(\mathrm{k}_{\mathrm{A}}-\mathrm{k}_{\mathrm{B}}\right) \times \mathrm{t}} \\ & \Rightarrow \quad \ell \mathrm{n} 8=\left(\mathrm{k}_{\mathrm{A}}-\mathrm{k}_{\mathrm{B}}\right) \times \mathrm{t}\end{aligned}$
$\ell \mathrm{n} 8=\ell \mathrm{n} 2\left(\frac{1}{\left(\mathrm{ta}_2\right)_{\mathrm{A}}}-\frac{1}{\left(\mathrm{ta}_2\right)_{\mathrm{B}}}\right) \times \mathrm{t}$
$t=\frac{3}{\left(\frac{1}{\left(t_{1 / 2}\right)_A}-\frac{1}{\left(t_{1 / 2}\right)_B}\right)}$
$
t=\frac{3}{\left(\frac{1}{10}-\frac{1}{40}\right)}
$
$
\frac{1}{10}-\frac{1}{40}=\frac{4-1}{40}=\frac{3}{40}
$
$
t=\frac{3}{\frac{3}{40}}=40 \text { minutes }
$
Hence, the correct answer is option (4).
Question 2. Drug X becomes ineffective after $50 \%$ decomposition. The original concentration of drug in a bottle was $ 16\mathrm {mg} / \mathrm{mL}$, which becomes 4 $\mathrm{mg} / \mathrm{mL}$ in 12 months. The expiry time of the drug in months is ________. Assume that the decomposition of the drug follows first-order kinetics.
Answer:
The decomposition of Drug $X$ follows first-order kinetics, meaning the rate of decomposition depends on the drug's concentration. The first-order rate equation is given by:
$ k=\frac{2.303}{t} \log \frac{[A]_0}{[A]} $
where: - $[A]_0=16 \mathrm{mg} / \mathrm{mL}$ (initial concentration), - $[\mathrm{A}]=\mathbf{4 \mathrm { mg }} / \mathrm{mL}$ (concentration after 12 months), - $\mathbf{t}=\mathbf{1 2}$ months (time taken for this change), - $\mathbf{k}$ is the rate constant.
$\begin{gathered}k=\frac{2.303}{12} \log \frac{16}{4} \\ k=\frac{2.303}{12} \log 4 \\ k=\frac{2.303}{12} \times 0.602 \\ k=0.1156 \text { month }^{-1}\end{gathered}$
The drug becomes ineffective after $50 \%$ decomposition, meaning when its concentration reduces to 8 $\mathrm{mg} / \mathrm{mL}$ (half of $16 \mathrm{mg} / \mathrm{mL}$ ). Using the first-order equation:
$ \begin{aligned} t_e & =\frac{2.303}{k} \log \frac{[A]_0}{[A]} \\ t_e & =\frac{2.303}{0.1156} \log \frac{16}{8} \\ t_e & =\frac{2.303}{0.1156} \times 0.301 \\ t_e & =6.01 \text { months } \end{aligned} $
Hence, the correct answer is option (4).
Question 3. Consider the following statements related to the temperature dependence of rate constants. Identify the correct statements,
A. The Arrhenius equation holds true only for an elementary homogeneous reaction.
B. The unit of A is the same as that of k in the Arrhenius equation.
C. At a given temperature, a low activation energy means a fast reaction.
D. A and Ea, as used in the Arrhenius equation, depend on temperature.
E. When Ea >> RT. A and Ea become interdependent.
Choose the correct answer from the options given below :
(i) A, C and D Only
(ii) B, D and E Only
(iii) B and C Only
(iv) A and B Only
Answer:
Arrhenius equation.
$
k=A e^{-\frac{E_a}{R T}}
$
A. Arrhenius holds true only for an elementary homogeneous reaction.
False, because it's an empirical law and is routinely used (and found valid) for complex, composite or even heterogeneous processes.
B. The unit of $A$ is the same as that of $k$.
True, since $e^{-E_a / R T}$ is dimensionless, $A$ must carry whatever units $k$ has.
C. At a given temperature, a low activation energy means a fast reaction.
True, because smaller $E_a$ makes $\exp \left(-E_a / R T\right)$ larger, hence a larger $k$.
D. A and $E_a$ as used in Arrhenius depend on temperature.
False, because in the simple Arrhenius model, both are treated as constants (over modest $T$ ranges).
E. When $E_a \gg R T, A$ and $E_a$ become interdependent.
False, because in some data sets you observe a correlation (compensation effect), the basic Arrhenius form still treats them as independent parameters.
Therefore, the only correct statements are B and C..
Hence, the correct answer is option (3).
The approach should be such that it saves your time yet improves your accuracy. The following are some points that can help you build a good approach for the Chemical Kinetics Class 12 NCERT Solutions.
To solve the questions, we need first to clear our concepts. Some of the important ones are given below-
Take Aakash iACST and get instant scholarship on coaching programs.
$
\ln [R]_0 /[R]=k t \text { or } k=\frac{2.303}{t} \log \frac{[R]_0}{[R]}
$
$
t_{1 / 2}=\frac{0.693}{k}
$
$
k=A e^{-E_a / R T} \text { or } \ln k=\ln A-\frac{E_a}{R T}
$
a. Numerical Problems
Identify the type of reaction (0, 1st, or 2nd order) and apply the correct formula (for k, t½, or concentration). Start by writing all the given values and then solve step-by-step. Be careful with units like seconds (s), moles per litre (mol/L), etc.
b. Conceptual questions
Learn definitions like rate, order, molecularity, etc., and understand the differences between the terms (e.g., order vs molecularity). You can also practice reasoning questions, like how temperature or concentration affects the rate.
c. Graph-based questions
Try to recognise the graph shapes for 0, 1st, and 2nd order reactions. Learn the concept behind the plots and their application in finding the rate law or half-life.
Start with the NCERT solved examples and practice all the NCERT exercise questions. You can also solve previous years' board questions for extra practice and feasible learning.
All the topics and subtopics covered in the NCERT textbook are listed below:
3.1 Rate of a Chemical Reaction
3.2 Factors Influencing the Rate of a Reaction
3.2.1 Dependence of Rate on Concentration
3.2.2 Rate Expression and Rate Constant
3.2.3 Order of a Reaction
3.2.4 Molecularity of a Reaction
3.3 Integrated Rate Equations
3.3.1 Zero Order Reactions
3.3.2 First Order Reactions
3.3.3 Half-Life of a Reaction
3.4 Temperature Dependence of the Rate of a Reaction
3.4.1 Effect of Catalyst
3.5 Collision Theory of Chemical
Here is a list of topics that are prominently asked in JEE:
Here is a list of NCERT chapter-wise solutions:
Here is a list of NCERT subject-wise solutions.
Here is a list of NCERT exemplar solutions, subject-wise solutions given below:
The NCERT books and syllabus links for class 12 are given below:
Frequently Asked Questions (FAQs)
The rate of reaction shows how fast reactants are used or products are formed over time. The rate constant (k) is a fixed value at a given temperature that links the rate with reactant concentrations in the rate law.
The Rate-Determining Step is the slowest elementary step in a reaction mechanism, and its rate determines the overall rate of the reaction. The rate law for the overall reaction is usually governed by the stoichiometry and concentrations involved in the rate-determining step.
Factors that influence the rate of chemical kinetics
The rate law is a mathematical expression showing how the rate depends on reactant concentrations. It is written as
Rate = k[A]x[B]y, where x and y are the orders with respect to A and B.
Activation energy is the minimum energy needed for reactant molecules to collide and form products. A lower activation energy means the reaction can happen more easily and quickly.
On Question asked by student community
Hello Aspirant,
Yes, in the case that you appeared for the 2025 improvement exam and your roll number is different from what was on the previous year’s marksheet, the board will usually release a new migration certificate. This is because the migration certificate will reflect the most recent exam details, roll number and passing year. You can apply to get it from your board using the process prescribed by them either online or through your school/college.
Hello,
Yes, you can. If you missed the first compartment exam, you can appear in the second compartment exam as per CBSE rules.
Hope it helps !
Hello Prisha
As you have compartment in Mathematics and you wish to change your stream to Humanities you have 2 options from here on:
1. You could try to study and clear your compartment of Mathematics.
2. You can change your stream to Humanities but you will need to repeat from Class 11th so you will need 2 years from now to clear Class 12th.
My personal suggestion will be to choose Option 1. Trust me I have dealt with this feeling myself and wanted to choose Option 2 but I worked hard and cleared my exams. I was scared not only in Mathematics but Physics, Chemistry and even Computer Science.
At last, it's on you what you want to choose.
Thank You!
HELLO,
The GUJCET merit list is calculated by considering 60% of the marks obtained in Class 12 and 40% of the GUJCET score. CBSE students are also eligible to compete with GSEB students, as the merit list is prepared by combining the Class 12 scores with the GUJCET performance.
CBSE Students and GUJCET:
Hope this Helps!
Hello Aspirant,
Yes, your CBSE migration certificate from March 2024 is totally good for reporting in 2025. These certificates do not randomly expire or anything. As long as you’ve got the real one and it is not scribbled then it is fine. No one’s gonna hassle you about the date, just make sure it’s in decent shape and you’re all set.
Take Aakash iACST and get instant scholarship on coaching programs.
This ebook serves as a valuable study guide for NEET 2025 exam.
This e-book offers NEET PYQ and serves as an indispensable NEET study material.
As per latest syllabus. Physics formulas, equations, & laws of class 11 & 12th chapters
As per latest syllabus. Chemistry formulas, equations, & laws of class 11 & 12th chapters
As per latest 2024 syllabus. Study 40% syllabus and score upto 100% marks in JEE